laser cutting machine is now becoming the mainstream of sheet metal processing equipment, along with the development of laser technology, laser cutting equipment to develop a larger and more diverse, the category also gradually. the fiber laser cutting machine and a CD laser cutting machine as a representative of ultrafast laser cutting equipment, many processing enterprises in preferred device, but for both, and what kind of advantages do? High-energy laser is to give you a look at below.　　

advantages and disadvantages of fiber laser cutting machine

Advantage: fiber laser cutting machine through the fiber-optic transmission, electro-optical conversion rate of around 35%, degree of flexibility increased, fewer points of failure, easy maintenance, speed, speedy, so the Fiber Cutter when cutting sheet 4mm has a big advantage.

cons: under the influence of laser wavelength, cutting 8mm steel, optical fiber end-face quality of laser cutting has been far from satisfactory, and when processing high metals such as aluminum, copper, will loss the laser should not be cut.Z5|　　


disc laser cutting machine the advantages and disadvantages

Advantages: disc laser cutting machine of photoelectric conversion rate can reach 35%, compact structure, covering an area of small, fast installation and commissioning. can process all kinds of high reflective material, and processing the results had no effect on the laser itself. over 2KW disc laser cutting machines, the beam parameter product (BPP) are standardized as 8mm/mrad, in cutting thin and thick plates have excellent cutting quality.

disadvantages: the price is slightly higher.

compared to the above analysis, it is not difficult to see that, in terms of choosing the right laser cutting machines, we must act according to its own set of processing if processing high metals, select disc laser cutting machine is a good choice. if the thickness 8mm sheet steel, 1000W fiber laser cutting machine is more cost effective. processed steel plate thickness 8mm, 2000W laser cutting machine more stable performance of the disc, is a good choice.

    Wuhan high-energy laser equipment manufacturing co., Ltd.: http://www.gnlaser.com/